SGADAS-39 Hyundai & KIA 39mm Forward Set Laser Floor Marker - 1pcs
Hyundai & KIA Specialized - ADAS Static Calibration Reflective Reusable Laser Floor Measuring Marker
ADAS Reusable Square Rubber Laser Reflective Floor Markers - Specific to Hyundai & KIA Static Calibrations
Made out of 100% Solid Rubber 1/4" Thick (6.35mm) Measure 2 3/4" x 3 7/8" (70mm x 97mm)
Use these instead of tape or chalk to mark the required positions on the floor when setting up your ADAS Static Calibration Equipment.
This Floor Marker is specifically designed to be used when performing a Static Calibration on Hyundai & KIA Vehicles
To be used with the dual placement 39mm & 989mm Target - (Example - Autel Target CSC0601-07)
Can be used with ANY ADAS Calibration System that requires markings on the floor for proper target stand placement.
Set of 1 ADAS Laser Floor Marker (1Pcs Total)
This 1 floor marker when placed properly automatically give the 39mm forward measurement (1st target placement spot) - See listing pics for proper use/placement
Reusable
Lightweight - Yet heavy enough to stay in place on the floor (even when it's damp or wet)
Coated in visible white reflective paint for easy to see laser markings
Easy to find center line as each piece is V cut both ways
Center of Marker is marked clearly (See Plumb Bob Pictures & 5 Line Laser Pics)
Easy to make measurements with tape measure by lining up end of tape measure or distance needed with bottom of V cut
45 Degree Angle on all 4 sides for visibility of laser line when adjusting centerline (Especially when adjusting centerline under the vehicle.)
Can be used with Reflective Board
Made in USA
We have been replacing automotive glass for 30+ years. About 3 years ago we decided to take the plunge into ADAS Calibrations and bought an Autel MA600. We do our own in house calibrations as well as mobile calibrations for other local glass shops & body shops.
To make a long story short - Over the first year after really diving into the ADAS Calibrations, we have developed and now manufacture these rubber floor markers that you can use over and over again.
Very durable, light weight, easy to store and simple to use.
No more dirty floor that the tape won’t stick too,
No more chalk lines to mark and remove,
No more having to buy tape and
Best of all, these markers have saved us a lot of setup time per job!
It literally pays for itself in very little time and is an inexpensive investment at $15.99 for this specialty marking square.
Hyundai & KIA Specialized - ADAS Static Calibration Reflective Reusable Laser Floor Measuring Marker
ADAS Reusable Square Rubber Laser Reflective Floor Markers - Specific to Hyundai & KIA Static Calibrations
Made out of 100% Solid Rubber 1/4" Thick (6.35mm) Measure 2 3/4" x 3 7/8" (70mm x 97mm)
Use these instead of tape or chalk to mark the required positions on the floor when setting up your ADAS Static Calibration Equipment.
This Floor Marker is specifically designed to be used when performing a Static Calibration on Hyundai & KIA Vehicles
To be used with the dual placement 39mm & 989mm Target - (Example - Autel Target CSC0601-07)
Can be used with ANY ADAS Calibration System that requires markings on the floor for proper target stand placement.
Set of 1 ADAS Laser Floor Marker (1Pcs Total)
This 1 floor marker when placed properly automatically give the 39mm forward measurement (1st target placement spot) - See listing pics for proper use/placement
Reusable
Lightweight - Yet heavy enough to stay in place on the floor (even when it's damp or wet)
Coated in visible white reflective paint for easy to see laser markings
Easy to find center line as each piece is V cut both ways
Center of Marker is marked clearly (See Plumb Bob Pictures & 5 Line Laser Pics)
Easy to make measurements with tape measure by lining up end of tape measure or distance needed with bottom of V cut
45 Degree Angle on all 4 sides for visibility of laser line when adjusting centerline (Especially when adjusting centerline under the vehicle.)
Can be used with Reflective Board
Made in USA
We have been replacing automotive glass for 30+ years. About 3 years ago we decided to take the plunge into ADAS Calibrations and bought an Autel MA600. We do our own in house calibrations as well as mobile calibrations for other local glass shops & body shops.
To make a long story short - Over the first year after really diving into the ADAS Calibrations, we have developed and now manufacture these rubber floor markers that you can use over and over again.
Very durable, light weight, easy to store and simple to use.
No more dirty floor that the tape won’t stick too,
No more chalk lines to mark and remove,
No more having to buy tape and
Best of all, these markers have saved us a lot of setup time per job!
It literally pays for itself in very little time and is an inexpensive investment at $15.99 for this specialty marking square.
Hyundai & KIA Specialized - ADAS Static Calibration Reflective Reusable Laser Floor Measuring Marker
ADAS Reusable Square Rubber Laser Reflective Floor Markers - Specific to Hyundai & KIA Static Calibrations
Made out of 100% Solid Rubber 1/4" Thick (6.35mm) Measure 2 3/4" x 3 7/8" (70mm x 97mm)
Use these instead of tape or chalk to mark the required positions on the floor when setting up your ADAS Static Calibration Equipment.
This Floor Marker is specifically designed to be used when performing a Static Calibration on Hyundai & KIA Vehicles
To be used with the dual placement 39mm & 989mm Target - (Example - Autel Target CSC0601-07)
Can be used with ANY ADAS Calibration System that requires markings on the floor for proper target stand placement.
Set of 1 ADAS Laser Floor Marker (1Pcs Total)
This 1 floor marker when placed properly automatically give the 39mm forward measurement (1st target placement spot) - See listing pics for proper use/placement
Reusable
Lightweight - Yet heavy enough to stay in place on the floor (even when it's damp or wet)
Coated in visible white reflective paint for easy to see laser markings
Easy to find center line as each piece is V cut both ways
Center of Marker is marked clearly (See Plumb Bob Pictures & 5 Line Laser Pics)
Easy to make measurements with tape measure by lining up end of tape measure or distance needed with bottom of V cut
45 Degree Angle on all 4 sides for visibility of laser line when adjusting centerline (Especially when adjusting centerline under the vehicle.)
Can be used with Reflective Board
Made in USA
We have been replacing automotive glass for 30+ years. About 3 years ago we decided to take the plunge into ADAS Calibrations and bought an Autel MA600. We do our own in house calibrations as well as mobile calibrations for other local glass shops & body shops.
To make a long story short - Over the first year after really diving into the ADAS Calibrations, we have developed and now manufacture these rubber floor markers that you can use over and over again.
Very durable, light weight, easy to store and simple to use.
No more dirty floor that the tape won’t stick too,
No more chalk lines to mark and remove,
No more having to buy tape and
Best of all, these markers have saved us a lot of setup time per job!
It literally pays for itself in very little time and is an inexpensive investment at $15.99 for this specialty marking square.